Guide to coating grades and applications

Introduction to glass coating grades

ECO FUSION
A standard grade to be used for livestock sewage storage. It can be used for storage of crop or less invasive waste as well.
pH pH4 - 9
Manufacturing Spray × 2, Sinter × 1
Enamel thickness 180~360μm
Electric conductivity test 9V
Hollow condition AWWA D103-97
-section 10.4
Quality condition EEA7.24 & 7.25
BS7793-1
ISO FUSION V700
An industrial grade to be used for bulk solid, rainwater, filtration tank and sewage storage. It offers high safety and protection in lowest cost.
pH pH3~9
Manufacturing Spray × 2, Sinter × 1
Enamel thickness 200 - 360μm
Electric conductivity test 700V
Hollow condition AWWA D103-97
-section 10.4
Quality condition EEA7.20 or above
EN ISO 28765: 2016*
TRI FUSION
Suitable for usage under severe condition such as industrial wastewater and sewage digestion. In addition to severe 1100V zero electric conductivity, enamel layer is additionally equipped.
pH pH2 - 11
Manufacturing Spray × 3, Sinter × 2
Enamel thickness 280 - 460µm
Electric conductivity test 1100V
Quality condition EEA7.20 or above
EN ISO 28765: 2016*
TRI FUSION PLUS
A high level grade beyond TRIFUSION. It can be used at most of severe environment. Zero electric conductivity at 1500V is qualified so it corresponds to corrosive agent and high temperature process.
pH pH1 - 14
Manufacturing Spray × 3, Sinter × 2
Enamel thickness 340 - 500µm
Electric conductivity test 1500V
Quality condition EEA7.20 or above
EN ISO 28765: 2016*

*Remarks :
EN ISO 28765: 2016 glass and porcelain enamel. Bolt assembly for the purpose of storage of water, drainage, industrial wastewater and sewage. Bolt assembly steel panel design covers glass coating condition and tank structural design. It is a standard specially certified for glass adhesion steel panel used for water and wastewater.
Zero electric conductivity policy is applied to ISOFUSION V700, TRI FUSION and TRI FUSION PLUS. All application needs consideration of concentration and temperature. All specification is related to only contact surface.

Glass coating application guide

Applications ECO
FUSION
ISO
FUSION
V700
TR1
FUSION
TR1
FUSION
PLUS
Inner color
Livestock sewage


14-C-39 (RAL 6028)
Edible oil/Plant oil  

20-C-40 (RAL 5013)
Dried coarse grained solid


Fermentation tank at farm


Rainwater/Extinguish water


Potable water
(ANSI/NSF61)



Filtration tank


Sewage storage
(without roof)



Sewage storage
(without roof)



Sewage mid-temp fermentation tank (within liquid)


Potable water
(DWI, Reg31 certified)



20-C-40 (RAL 5013)
Sewage reversed wastewater


Sewage cake storage


Basements/Semi-basement
 
14-C-39 (RAL 6028)
Glass adhesive panel floor
 
Sewage storage
(with roof)

 
Sewage storage
(with roof)

 
Industrial wastewater/Aeration process
 
Food processing cleaning water
 
Microbe in liquid
 
Sewage mid-temp fermentation tank (Upper part and roof)
 
High temp fermentation tank
(within liquid)

 
High temp fermentation tank
(Upper part and roof)

    14-C-39 (RAL 6028)
High temp application
   
Corrosive/Chemical agent industrial wastewater
   

Outer color


Other Color
Other outer color is available.
All color identification number is approximately.
All outer surface of glass is adhesion glass status.