KYODO INTERNATIONAL INC./Japan

Japanese
Contact Us
  1. KYODO INTERNATIONAL INC./Japan
  2. News & Press

List of News << All Categories All year >>

Sep 1.2017 
We shall exhibit "MEMS SENSING & NETWORK SYSTEM 2017"
We shall exhibit at "MEMS SENSING & NETWORKING SYSTEM 2017" which will be held at Makuhari Messe International Convention Complex on 4th (Wed) to 6th (Fri) of October 2017.

Details are follows

 [Outline]
Date & Time October. 4th [Wed] - 6th[Fri], 2017  10:00-17:00
Venue Makuhari Messe International Convention Complex
Booth NO 11-H

 [Contents]
MEMS Total Solution for Prototyping and Volume Production
We offer optimal solution to meet customer’s budget and schedule from designing and prototyping MEMS devices to MEMS mass production by utilizing our own processing equipment and domestic and overseas networks.

[ Process Example ]

  • Thin Film Deposition (Sputter、Evaporation、CVD、Electro Plating、ALD etc.)
  • Photolithography (Aligner、Stepper、EB etc.)
  • Etching (Wet, Dr, 、Si Deep RIE(ICP), Sand Blast etc.)
  • CMP (Planarization for thin layers and post-bonding etc.)
  • Wafer Bonding (Room-temp bonding, Plasma bonding, Anodic bonding, Eutectic bonding etc.)
  • Ion Implant
  • Annealing (Laser annealing, RTA, Thermal diffusion etc.)
  • Dicing/ Wafer thinning process (Dicer、Stealth Dicing, BG etc.)
  • Nanoimprint (Mold fabrication, Nanoimprinting services, Anti-sticking mold treatment, Technology consulting)

[ Joint Exhibition: MEMS Volume Production Foundry "Silex Microsystems" ]

  • World No.1 Pure Play MEMS Foundry dedicated for OEM
  • Designated for the latest φ8” MEMS volume production fab
  • Original TSV technology ’Sil-Via' 'Met-Via' 'Met-Cap'
  • Original TGV technology for thinning MEMS device
  • Launch of the manufacturing service in Semi-Custom Pressure Sensor ‘RocketMEMS’
  • Establishment of PZT layer deposition by Sol-Gel method
  • Mass Production of Micro Needle for Bio/ Medical application
IoT Total Solution
IIt must be required knowledge of technology and project management for IoT which is composed of device design, device manufacture, network, security, data process.We offer total coordination/integration in each component of IoT with our technical knowledge and experiences


[ IoT Devices Example ]

  • Wearable device for biological information monitor in animal husbandry ”Intelligent nose ring” (in development)
  • IoT system construction “Start-up Kit” IoT

If you intend to visit the event, do not hesitate to stop by our booth

Aug 17.2017 
Join our presentation and visit our booth at “JASIS2017”!
We shall exhibit at “JASIS2017”, which will be held on 6th -8th September. We will give a presentation of our product in Life science innovation zone on 7th September.

Details are follows

 [Details]
Date 6th (Wed.) - 8th (Fri.) of September, 2017
Venue Makuhari Messe, Hall 8
Booth NO AB-24 (Life Science Innovation Zone)

 [展示内容]
3D cell culture device with microfluidic technology CEP3D II
  • CEP3D II, which is connecting two different sizes of well by microchannel, provide concentration gradient in the channel. It will reduce the use of medium, additives reagent and cells and be very useful for high-throughput drug screening. Also by adding scaffolding materials such as collagen and hydrogel, it is also possible to 3D culture human ES/iPS cell.
Mimicking in vivo environment chip, Organ-On-A-Chip
  • Our Organ-on-a-Chip is a cell culture chip, which consists of three-layer glass. By attaching cell to microspores of membrane at the center of middle layer, it could culture cell with various flow condition. It is easy to set the chip and connect tubes and it is next-generation cell culture device, which could create in vivo mimicking environment using microfluidic flow. Dedicated Chip holder can be equipped with up to four Organ-on-a-chips., and by integrating with pump, it could create various flow condition for cell culture.
---- Presentation ----
"Cell Culture Device with microfluidic technology."
  • Date and time: 7th September(Thu) 12:25 - 13:00
  • Room: Life science diagnostics innovation zone Area2
  • Content: Life Science products with microfluidic technology are expecting significant future development. We will introduce our microfabrication technologies and products based on microfluidic technology using our domestic and international network. (3D Cell Culture Device CEP3D II, Organ-On-A-Chip)
*No need advance application

Please visit our booth (AB-24 in Life science innovation zone.)

Jul 6.2017 
We shall exhibit at “Seminar to support medical device development and commercialization”.
We shall exhibit at “Seminar to support medical device development and commercialization”, which will be held between the 29th of July.

 [Details]
Date Date 29th of July 2017
Venue Kawasaki Frontier Building

 [Contents]
DNACollection Kit “OrageneDNA”
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
Microbial Collection and Stabilization Kits OMNIgene・VAGINAL
  • Easy self-collection of high quality DNA and RNA vaginal samples
  • Maintain DNA & RNA integrity during typical ambient temperature fluctuations (e.g., -20°C to 30°C) for up to 30 days
Thin film deposition and nano/micro structure fabrication services

-- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  • materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Nano-micro patterning on plastic and film substrates by proprietary nanoimprint solutions.
MEMS sensor design to manufacturing services
We undertake MEMS device design to manufacturing for wearable devices, point-of-care devices.
--- Examples of Manufacturing MEMS devices for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.
If you intend to visit the event, do not hesitate to stop by our booth.

Jul 6.2017 
We shall exhibit at “Seminar to support medical device development and commercialization”.
We shall exhibit at “Seminar to support medical device development and commercialization”, which will be held between the 29th of July.

 [Details]
Date Date 29th of July 2017
Venue Kawasaki Frontier Building

 [Contents]
DNACollection Kit “OrageneDNA”
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
Microbial Collection and Stabilization Kits OMNIgene・VAGINAL
  • Easy self-collection of high quality DNA and RNA vaginal samples
  • Maintain DNA & RNA integrity during typical ambient temperature fluctuations (e.g., -20°C to 30°C) for up to 30 days
Thin film deposition and nano/micro structure fabrication services

-- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  • materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Nano-micro patterning on plastic and film substrates by proprietary nanoimprint solutions.
MEMS sensor design to manufacturing services
We undertake MEMS device design to manufacturing for wearable devices, point-of-care devices.
--- Examples of Manufacturing MEMS devices for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.
If you intend to visit the event, do not hesitate to stop by our booth.

Jun 21.2017 
We shall exhibit at “SEMICON WEST 2017”
We shall exhibit at "SEMICON WEST 2017" which will be held at MOSCONE CENTTER in SANFRANCISCO, CA from 11th(Tue) to 13th(Thu) of July, 2017.

Details are as follows.

 [Ditails]
Date & Time 11th (Tue.) to 13th(Thu.) of July, 2017 10:00−17:00
Venue MOSCONE CENTER, SANFRANCISCO, CA in U.S.A.
Booth NO North Hall 5187

 [Contents]
We offer foundry services such as thin film deposition, etching and CMP and introduce our newest development.
< Wafer process foundry services for prototyping >
  • Thin film deposition process: Sputtering, CVD, ALD and Electro forming
  • Photolithography: Naonoimprinting lithography, Etching
  • CMP/BG/Bonding: Planarization/ Back grinding/ Various bonding
  • Application field: Semiconductor, MEMS, LED, LCD and Microfluidics etc.
  • IP consulting
< New Technologies>
  • Membranes structure by various materials
  • Thin film thermistor
  • Nano/ micro patterning structure by nanoimprinting system
  • Functional powder by sputtering deposition
  • Various sensors and actuators based on MEMS technologies
  • Bonded wafers by normal temperature bonding system

If you intend to visit the event, do not hesitate to stop by our booth.

Jun 19.2017 
Please visit Interphex Japan to take a look at “Organ-on-a-Chip”
We will exhibit “Organ-on-a-Chip” at our partner company “IRIE CORPORATION”’s booth in Interphex Japan.

Detail as below.

 [Details]
Date Date 28th-30th of June, 2017
Venue Venue Tokyo Big Sight
Booth No W2-86 “IRIE CORPORATION’s booth in West 1 Hall

 [Contents]
Organ-On-A-Chip
Organ-on-a Chip is a microfluidic cell culture device inhabited by living cells arranged to simulate tissue- and organ- level physiology. These devices produce levels of tissue and organ functionality not possible with 2D or 3D culture systems. This technology has great potential to advance the study of tissue development, organ physiology and disease etiology.


Lensless microscope SENZA
The SENZA lensless microscope is engineering to image living cells within the incubator. Intensity and phase imaging is possible at the same time.

We are looking forward to seeing you at our booth.

May 25.2017 
We will exhibit at " EM-NANO 2017"
We will have a booth at "EM-NANO 2017−The International Symposium on Organic and Inorganic Electronic Materials and Related Nanotechnologiesー", which will be held from 19th to 21st June 2017.

Details are as follows.

 [Details]
Date 19th – 21st of June 2017
Venue AOSSA in front of Fukui station

 [Contents]
nano-micro Prototyping Foundry - We offer the best material and processes for prototyping -
  • Materials
  • Thin film formation
  • Etching
  • CMP / Bonding / Wafer thinning

Equipment for R&D
  • High Resolution Lithography System
  • Spin Coater
  • Lapping Machine
  • Sputtering System
  • Dryice Blaster

We are looking forward to seeing you at our booth.

Apr 25.2017 
We will exhibit at “The 2nd Japanese Pulmonary Circulation and Pulmonary Hypertension Society"
We will have a booth at “The 2nd Annual Meeting of Japanese Pulmonary Circulation and Pulmonary Hypertension Society”, which will be held from 2nd to 3rd June 2017.

Details are as follows.

 [Details]
Date 2nd-3rd of June 2017
Venue Hotel Sapporo Geibunkan

 [Contents]
Animal experiment system for making Pulmonary Hypertension animal model

They system can be used for making Pulmonary Hypertension mouse or rats. We have already provide about 100 system to Japanese market. We will exhibit not only Oxygen controller but also animal chamber and peripherals.

We are looking forward to seeing you at our booth.

Apr 6.2017 
We shall exhibit at "MEDTEC Japan 2017"
We shall exhibit at "MEDTEC Japan 2017" which will be held at Tokyo Big Sight during 19th (Wed) to 21st (Fri) of April, 2017.
We shall exhibit our micro fabrication technologies and Biotechnology/ MEMS related service and products based on thin film deposition, photolithography, etching, and nanoimprinting.

Details are follows

 [Ditails]
Date 19th-21st of April, 2017
Venue Tokyo Big Sight
Booth No 3105

 [Contents]
Thin film deposition and nano/micro structure fabrication services

--- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  •  materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Patterning fabrication on the flat surface and the three dimensional structure with original nanoimprinting tool for antibacterial, sense of touch, micro channel, super water repellent structure etc.
Manufacturing services for micro machining parts (MEMS) in medical equipment and tools

We offer optimal solution for volume manufacturing in MEMS.

--- Examples of Manufacturing MEMS devices
for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.

CEP3D II –Cellar Environment Plate for 3D cell culture
This plate adapting microfluidic technology can be used for iPS and ES cells differentiation induction It save the amount of medium and other additives like hormone or cytokine for cell culture and achieve efficient 3D stem cell culture.

Organ-On-A-Chip
Organ-on-a Chip is a microfluidic cell culture device inhabited by living cells arranged to simulate tissue- and organ- level physiology. These devices produce levels of tissue and organ functionality not possible with 2D or 3D culture systems. This technology has great potential to advance the study of tissue development, organ physiology and disease etiology.

If you intend to visit the event, do not hesitate to stop by our booth.

Apr 6.2017 
We shall exhibit at "MEDTEC Japan 2017"
We shall exhibit at "MEDTEC Japan 2017" which will be held at Tokyo Big Sight during 19th (Wed) to 21st (Fri) of April, 2017.
We shall exhibit our micro fabrication technologies and Biotechnology/ MEMS related service and products based on thin film deposition, photolithography, etching, and nanoimprinting.

Details are follows

 [Ditails]
Date 19th-21st of April, 2017
Venue Tokyo Big Sight
Booth No 3105

 [Contents]
Thin film deposition and nano/micro structure fabrication services

--- For Medical Care/Nursing/Material/Chemical/Electronics ---
  • Thin film Deposition Service with over 120 different
  •  materials(SiO2, Ag, TiO2, Ti, Au etc. )for various functions such as antibacterial, deodorization, hardness enhancement, durability enhancement, corrosion protection etc.
  • Patterning fabrication on the flat surface and the three dimensional structure with original nanoimprinting tool for antibacterial, sense of touch, micro channel, super water repellent structure etc.
Manufacturing services for micro machining parts (MEMS) in medical equipment and tools

We offer optimal solution for volume manufacturing in MEMS.

--- Examples of Manufacturing MEMS devices
for medical application ---
  • MEMS Vibration Harvester(Application example:Oscillator for leadless pace maker)
  • Micro needle(Application example:Medical patch)
  • MEMS pressure sensor(Application:Pressure sensor for blood pressure measurement)
IoT total solution
We offer to integrate and consult service for whole IoT components from sensor devices/ network/ data base/ user interface such in healthcare, home healthcare etc.

CEP3D II –Cellar Environment Plate for 3D cell culture
This plate adapting microfluidic technology can be used for iPS and ES cells differentiation induction It save the amount of medium and other additives like hormone or cytokine for cell culture and achieve efficient 3D stem cell culture.

Organ-On-A-Chip
Organ-on-a Chip is a microfluidic cell culture device inhabited by living cells arranged to simulate tissue- and organ- level physiology. These devices produce levels of tissue and organ functionality not possible with 2D or 3D culture systems. This technology has great potential to advance the study of tissue development, organ physiology and disease etiology.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 15.2017 
We will exhibit at “The 91 st Annual Meeting of the Japanese Association for Infectious Diseases”
We will exhibit at “The 91 st Annual Meeting of the Japanese Association for Infectious Diseases”, which will be held from 6th to 8th April.

Details are as follows.

 [Details]
Date 6th-8th of April
Venue Keio Plaza Hotel Tokyo
Booth No 11

 [Contents]
OMNIgene®・ORAL
  • Collecting a bacteria / viral DNA (RNA) contained in oral specimens (saliva, plaque, tongue) and store at room temperature.
  • Application: Metagenome analysis, PCR-PFLR, RT-qPCR, etc.
[NEW]OMNIgene®・VAGINAL

  • Collecting a vaginal flora (bacteria / virus) DNA and RNA and store at room temperature.
  • Application: PCR, RT-qPCR, microarray, NGS, etc.

OMNIgene®・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit our booth(No.11).

Feb 2.2017 
The Chinese Website about Nanoimprinting PSS volume production system “TEX Series”
We are pleased to announce that we now have the Chinese Website about Nanoimprinting PSS volume production system “TEX Series”.
The Chinese Website Page consists of many contents, including technical and cost advantage with the comparison to conventional lithography, technical data, specification of imprinting tool and so on.

URL : http://nanopss.com/cn/

Jan 18.2017 
We shall exhibit at "FOODEX JAPAN 2017 - The 42nd International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2017 - The 42nd International Food and Beverage Exhibition", which will be held between the 7th -10th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2017 official web site

If you intend to visit the event, do not hesitate to stop by our boo

Dec 28.2016 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.29.2016 - Jan.3.2017

We shall resume the operation from the 4th of January, 2017.
For inquiries we will receive via our website during the period, you will retrieve reply after the 4th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2017!


Dec 26.2016 
We shall exhibit at “ 3rd WEARABLE EXPO"
We shall exhibit at "3rd WEARABLE EXPO - Wearable Device & Technology Expo" which will be held at Tokyo Big Sight during 18th(Wed) to 20th(Fri) of January, 2017.

Details are as follows.


 [Dertails]
Date January 18 [Wed] - 20 [Fri], 2017
Venue Tokyo Big Sight
Booth West Hall No.W22-20

 [Contents]
[ Manufacturing MEMS sensor ]
  • We offer from prototyping to volume production timely in various kinds of MEMS sensors which is required for wearable devices. (Accelerator Sensor, Pressure Sensor etc.) 

[ Introduction of peculiar technologies ]
  • Sputtering thin film deposition
    - Realizing high insulation characteristics as CVD deposition by sputtering method
      (Suitable for insulation layer deposition on film substrates)
    - Realizing ITO layer resistant value of 30Ω/□ by normal temperature deposition 
  • Photolithography /Pattering
    - High precision μm patterning process on film substrate
    - Patterning process by Ink-jet method
  • Nanoimprint total solution
    - High functionality by nanoimprinting on films
  • PZT devise for Energy harvest
    - MEMS vibration harvester for Leadless pace maker
    (Silex Microsystems社 European smart-MEMPHIS H2000 program)
[ IoT total coordination ]
Development for innovative products and services for our life an environment have been progressing by the spread of IoT technology. It must be required knowledge of technology and project management for IoT which is composed of device design, device manufacture, network, security, data process. We offer total coordination/integration in each component of IoT with our technical knowledge and experiences
  • Example of IoT Devices
    - Wearable device for biological information monitor in animal husbandry "Intelligent nose ring"
    - IoT system construction "Start-up Kit"

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 17.2016 
We shall exhibit at “SEMICON Japan 2016”
We shall exhibit at "SEMICON Japan 2016" which will be held at Tokyo Big Sight during 14th(Wed) to 16th(Fri) of December, 2016.

Details are as follows.

 [Details]
Day & Time 14th (Wed.) to 16th(Fri.) of December, 2016 10:00−17:00
Venue Tokyo Big Sight
Booth NO 5220 (Hall5), 3707 (Hall3)

 [Contents]
Front end Exhibit Zone:5220 (Hall5)
・We offer foundry services such as thin film deposition, etching and CMP and introduce our newest development.
・We offer maintenance services including repair, cleaning and bonding process services for consumable and discontinue parts in semiconductor manufacturing equipment.
[ Foundry services for front end process ]
  • Thin film deposition process:Sputtering、CVD、ALD、PLD、Electro forming
  • Photolithography・Etching
  • CMP/BG/Bonding:Planarization/Back Gginding/Various Bonding
[ New technologies ]
  • Customized membranes
  • Thin film thermocouples
  • Sputtering deposition for functional powder
  • Magnetic nanoimprinting
[ Various Microfabrication Tool ]
  • Multi-purpose spin processor “POLOS”
  • Nano-pattern lithography system “PhableR 100” etc. 
[ Consumable Parts and Maintenance parts for Semiconductor manufacturing Equipment ]
  • Discontinuing tool parts repair, maintenance and overhaul
  • High Functional Parts for CMP Process
  • No damage cleaning technology “Dry Ice Blast Cleaning”
  • Optimum cleaning method from combination of chemical and sand breasting
[ Bonding services (Metal・Resin bonding) ]
  • Cylindrical target bonding, Cryo panel, ESC  etc.
World of IoT Zone:3707 (Hall3)
Development for innovative products and services for our life an environment have been progressing by the spread of IoT technology. It must be required knowledge of technology and project management for IoT which is composed of device design, device manufacture, network, security, data process.
We offer total coordination/integration in each component of IoT with our technical knowledge and experiences
[ IoT Devices ]
  • Wearable device for biological information monitor in animal husbandry ”Intelligent nose ring”
  • IoT system construction “Start-up Kit” IoT
[ Application of processing technologies ]
  • High resolution process by nanoimprint technology : Enlarge surface area in fuel cell and enhancing optical feature in solar battery
  • Thin film deposition on flexible film : Human sensor ・Wearable devices etc.
  • MEMS device development and fabrication by dedicated MEMS processing technology : Energy harvest by Piezo electric devices

If you intend to visit the event, do not hesitate to stop by our booth.

Oct 5.2016 
We shall exhibit JDDW2016 “Japan Digestive Disease Week 2016”
We shall exhibit JDDW2016 “Japan Digestive Disease Week 2016” at Kobe Convention Center.

Details are follows.

 [Details]
会期 3rd-5th November
Venue Kobe International Exhibition Hall , No.1 Building 1st floor
Booth No 13

 [Contents]
Microbial Collection and Stabiization kit OMNIgene GUT
OMNIgene GUT is an all in one system for the easy self-collection and stabilization of microbial DNA from feces/stool for gut microbiome profiling.
Canadian supplier, DNAGenotek, will also attend the exhibition.

If you intend to visit the event, do not hesitate to stop by our booth.

Sep 6.2016 
We shall exhibit “The 89th Annual meeting of the Japanese Biochemical Society” .
We shall exhibit “The 89th Annual meeting of the Japanese Biochemical Society” at Sendai International Center.

Details are follows

 [Details]
Date 25th-27th of September
Venue Sendai International Center
Booth No 6

 [Contents]
DNA/RNA Self Collection Kit
We will exhibit products that optimize ease of collection and provide superior samples and proven performance for nucleic acid testing from various biological samples like saliva, feces, gum, tongue etc. High-quality samples that are easily collected from target populations enable our customers to focus on translating their analysis and testing into significant worldwide advancements in health and science.

Oxygen controller
The oxygen controller create hyperoxia – hypoxia environment (0.1~99.9%) in chamber or incubator. It can be used for not only cell culture but also animal or plant experiment.

Others
We also introduce 3D bio-printers, Liquid nitrogen free controlled rate freezer and high pressure chamber.

If you intend to visit the event, do not hesitate to stop by our booth.

Aug 17.2016 
We shall exhibit at “JASIS2016”
We shall exhibit at “JASIS2016”, which will be held between the 7th -9th of September. We will also give a presentation of our product in Life science innovation zone on 9th September.

Details are follows

 [Details]
Date 7th(Wed.) - 9th(Fri.) of September, 2016
Venue Makuhari Messe, Hall 8
Booth No AB-19 (Life Science Innovation Zone)

 [Contents]
DNACollection Kit “OrageneDNA”
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures. The DNA collected is high quality and quantity allowing for use in most downstream applications.


[NEW] Microbial Collection and Stabilization Kits OMNIgeneOral For gum, plaque and tongue microbiome
  • A collection kit for the mouth Flora DNA / RNA from the gums or tongue. After collecting the samples can store at room temperature.
  • It can qualitative analysis in order to keep the bacterial flora of the time of collection in a stable manner  



[NEW] NANORULERS 
  • New standard tool which is a fluorescent dye immobilized on glass slides
  • Easy resolution evaluation of super-resolution microscope, fast, can be carried out accurately.
---- Presentation ---- 

"Grasp the key to the genome research and business success."

Date and time: 9th September(Fri) 13:0013:25
Room: Life science diagnostics innovation zone

*No need advance application


Please visit our booth(AB-19 in Life science innovation zone.)

Aug 16.2016 
We shall exhibit "MEMS SENSING & NETWORK SYSTEM 2016"
We shall exhibit at "MEMS SENSING & NETWORKING SYSTEM 2016" which will be held at Pacifico Yokohama 14th (Wed) to 16th (Fri) of September, 2016.

Details are follows

 [Outline]
Date & Time September. 14th [Wed] - 16th[Fri], 2016 10:00-17:00
Venue Pacifico Yokohama
Booth NO G-6

 [Contents]
MEMS Volume Production Foundry /Joint Exhibition:Silex microsystems (Sweden)
  • World No.1 Pure Play MEMS Foundry dedicated for OEM
  • Designated for MEMS Φ6“/ the latest φ8”volume production fab
  • Original TSV technology "Sil-Via" "Met-Via" "Met-Cap"
  • Original TGV technology for thinning MEMS device
  • Launch of the manufacturing service in Semi-Custom Pressure Sensor ‘RocketMEMS’
  • Establishment of PZT layer deposition by Sol-Gel method
  • Mass Production of Micro Needle for Bio/ Medical application
MEMS Prototyping Solution
We offer optimal process for your MEMS development and fabrication requests using our decades-long expertise and several fabrication processes.

[ Process Example ]
  • Thin Film Deposition(Sputter、Evaporation、CVD、Electro Plating、ALD etc.)
  • Photolithography(Aligner、Stepper、EB etc.)
  • Etching(Wet、Dry、Si Deep RIE(ICP)、Sand Blast etc.)
  • CMP(Planarization for thin layers and post-bonding etc.)
  • Wafer Bonding(Room-temp bonding、Plasma bonding、Anodic bonding、Eutectic bonding etc. )
  • Ion Implant
  • Annealing(Laser annealing、RTA、Thermal diffusion etc.)
  • Nanoimprint(Mold fabrication、Nanoimprinting services、Anti-sticking mold treatment、Technology consulting
Microfabrication Equipment
  • R&D Nano-meter-level exposure system "PhableR 100"
  • “UV Nanoimprinting tool” for R&D application with low cost and easy to use design.
  • All plastic versatile Spin processor “SPIN150i” capable for all spin process such as coating, etching, developing, cleaning and spin dry with chemical inert.  
  • Mask Aligner, equipped with high quality UV Light Source and Exposure System by OAI who have an abundance of expertise in UV light source development, realizes for optimal Mask Aligner from R&D to production stage.

If you intend to visit the event, do not hesitate to stop by our booth.

Jun 24.2016 
We shall exhibit at "TECHNO-TRANSFER in KAWASAKI 2016"
We shall exhibit at "TECHNO-TRANSFER in KAWASAKI 2016" on Wednesday 7/6 to 7/8 in Kanagawa Science Park (KSP) Innovation center WEST building.

Details are follows.

 [Details]
Date 6th to 8th of July, 2016
Venue Kanagawa Science Park (KSP) Innovation center WEST building.
Booth No 3F-34

 [Content]
The device blasts grained dry ice particles from a nozzle against a target by highly compressed air.
We exhibit “ SUPERBLAST Reborn”
  • Removal of resinous affix (sticking substances and oils)
  • Metal Molding (injection mold etc.)
  • Removal of burnt for food use hot plate
  • Removal for any kinds of paintings
  • Sterilization of medical and nursing care product
  • Cleaning for machine parts or jigs
  • Removal of burr                    etc. applied for various applications and uses!!
We offer Manufacturing・Sales・Cleaning Services・Rental of Dry Ice Blast Cleaning

We are looking forward to seeing you at our stand.

May 17.2016 
We shall exhibit at "BIOMASS EXPO 2016"
We shall exhibit at "BIOMASS EXPO 2016" on Wednesday 6/15 to Friday 6/17 at East
Hall, Tokyo Big Sight.

Details are follows

 [Details]
Date 15th-17th of June, 2016
Venue Tokyo Big Sight
Booth No Bio - 46

 [Contents]
  • PERMASTORE Glass lining tanks (Methane digesters, Sludge tanks, Wastewater tanks)
  • Submersible mixers and pumps
  • Double and single membrane gasholders
  • Gas flares -Hexa floating covers

We are looking forward to seeing you at our stand.

Apr 27.2016 
We shall exhibit at “The 63rd Annual Meeting of Japanese Association for Animal Science”.
We shall exhibit at "The 63rd Annual Meeting of Japanese Association for Animal Science" which will be held at MUZA KAWASAKI SYMPHONY HALL during 18th (Wed) to 20th (Fri) of May, 2016.

Details are follows

 [Details]
Date 18th-20th of May, 2016
Venue MUZA KAWASAKI SYMPHONY HALL
1310 Omiya-cho, Saiwai-ku, 212-8557 Kawasaki-City
Booth No A-18

 [Contents]
Oxygen Controller ProOx110
We will introduce the oxygen controller that use at animal experiments. Oxygen controller can control low oxygen by the nitrogen gas supply and control high oxygen experiment by the oxygen gas supply.
Application example:Pulmonary hypertension model、Retinopathy of prematurity mode

OMNIgene・GUT
OMNIgeneGUT can be used in the intestinal environment inspection, after collection is in a stable manner keeping the specimens at room temperature.
It is easy to collect specimens, and to facilitate the specimen collected and at home collection of from afar.


PERFORMAGENE

Performagene can collect DNA from animals that dogs, horses and any other. It solely enables DNA collection from saliva and long-term preservation.

Please come and see us (booth#A-18).if you come to be the conference.

Apr 7.2016 
We shall exhibit in Test Kit Expo of “MEDTEC Japan 2016”
We shall exhibit at "MEDTEC Japan 2016" which will be held at Tokyo Big Sight during 20th (Wed) to 22th (Fri) of April, 2016.

Details are follows

 [Details]
Date 20th-22th of April, 2016
Venue Tokyo Big Sight
Booth No 800

 [Contents]
DNA self-collection kit Oragene - Human DNA from saliva -
  • This kit is for human DNA for collecting from saliva. It can store DNA at room temperature for a long time.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
  • Option compatible original packaging, barcoded
  • Those who are already service deployment, also those who are considering the future introduction in the new business please visit our booth
[ NEW ]DNA Collection kit OMNIgene GUT -Microbial DNA from feces-
It can be used in the intestinal environment inspection, after collection is in a stable manner keeping the specimens at room temperature. It is easy to collect specimens, and to facilitate the specimen collected and at home collection of from afar.  

Microfluidics Chip・μTAS
We introduce products and services of Microfluidics Chip and μTAS for analysis and diagnosis application. We offer not only manufacturing of chips and holders but from designing or fabrication to volume production of glass and polymer products.

-Application example of analysis & diagnosis for Microfluidics Chip and μTAS-
  • ”Droplet Generator” for biomedical research and development
  • “Flow-cell” for analysis system
  • “Micro reactor / Micro Mixer” for chemosynthesis
  • Peripheral for Pump / Chip Holder
Nano・micro fabrication
We offer nano-micro size processing services by taking advantage of our semiconductor equipment. We can respond to customer’s needs such as small number of fabrication of micro channel or mold for plastic injection for R&D purpose, by offering thin film coating achieved by our abundant 120 target materials (Ti, Co, Si, and Au) as with various patterning process.

-Application example of Thin-film・micro fabrication technology in medical・nursing industry-
  • Barrier (SiO2, SiN, etc.)
  • Antibacterial (Ag, Cu etc.)
  • Deodorization (TiO2 etc.)
  • Coloring for medical/nursing goods (Al, Au, Ti, etc.)
  • Surface roughness fabrication for rubber/plastic parts
  • Microfluidics Chip
MEMS volume production foundry
We introduce MEMS production foundry services for 8 inch silicon wafer. We can respond to customer’s needs for outsourcing of MEMS devices manufacturing in the phase of volume production.

-Example of MEMS device production for medical application-
  • Micro mirror array for medical equipment
  • Micro needle
  • Wearable device/equipment

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 23.2016 
DNA genotek will exhibit at “The 13th International Congress of Human Genetics”
DNA Genotek is coming to ICHG 2016!

Please visit Kyodo International and DNA Genotek at Booth 29 to learn about sample collection and stabilization products for human genetics, microbiology and infectious disease. Oragene.DNA kits collect and preserve DNA from saliva for years at room temperature. OMNIgene.GUT fecal kits offer easy self-collection and immediate stabilization of the gut microbiota profile.

Have your picture taken in "Canada" in our custom photobooth! 

 [Details]
Date 4th-6th of April.
Venue Kyoto International Conference Center
Booth No. 29

 [Contents]
Oragene®・DNA
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
[ NEW ] OMNIgene®・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit their booth(No.29).

Mar 16.2016 
Silex Microsystems shall exhibit at "IEEE-NEMS 2016"
Silex Microsystems shall exhibit at "The 11th Annual IEEE International Conference on Nano/Micro Engineered and Molecular Systems (IEEE-NEMS 2016) " which will be held at Matsushima Bay and Sendai MEMS City, Japan, 17-20 April, 2016.

Details are follows.

 [Details]
Date for exhibition 18(Mon.) -20(Wed.), 2016
Venue Taikanso, Matsushima

 [Contents]
MEMS foundry ’Silex Microsystems’
  • φ6",8"compatible MEMS foundry
  • Unique TSV technology
    1) Sil-Via : For better thermal resistivity and higher density by applying all Si structure
    2) Met-Via / Met-Cap : For better yield by applying Cu hollow structure
    3) For low power loss by Glass Via structure
  • Unique TGV technology : (for low power loss by Glass via structure)  
  • PZT production technology with sol-gel method
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 8.2016 
We shall exhibit "26th FINETECH Japan" at MEMS Technology Zone
We shall exhibit at "26th- FINETECH Japan" which will be held at Tokyo Big Sight during 6th (Wed) to 8th (Fri) of April, 2016.

Details are follows

 [Outline]
Date April. 6th [Wed] - 8th[Fri], 2016
Venue Tokyo Big Sight East Hall
Booth NO E43-15

 [Contents]
[ M E M S ]
MEMS Device Volume Production (MEMS Foundry)
  • Partnership with Silex microsystems
  • Pure-Play MEMS foundry without in house manufactured products
  • Equipped φ6” and φ8” production line dedicated for MEMS.
== Platform technology to realizing high yields ==
- TSV technology for high temperature and density with Sil-Via, all Si structure.
- TSV technology for high yield by Cu hollow construction with Met-Via/Met-Cap
- Established PZT thin film deposition with Sol-Gel method.

== "SmartBLOCK" to realize high cost-effectiveness ==
- SmartBLOCK uses proven process blocks extracted from working process libraries to integrate functionality into a single structure. Faster more cost-efficient development through modular standardization using SmartBLOCK will support customers for timely product release.

[ Nanoimprint ]
Total solution with mold fabrication -imprinting services -related material supply
  • Mold fabrication (Nano〜Micro order mold)
  • Imprint process services (Introducing imprinting services results over 1000 cases including large size imprinting)
  • Suitable material offer for imprinting condition
  • Seamless RtR mold for mass production
Application of Micro/Fine structure and technology consulting
  • Anti-Reflection structure (Solar cell, Display etc.)
  • Hydrophobic structure (Window, Packing material for liquid etc.)
  • Anti-fogging structure (Bio technology etc.)
  • Droplet catch structure (flow controlling products)
Nanoimprinting Product
  • Schale with cell culture chip
  • Sapphire glass with anti-reflection structure

If you intend to visit the event, do not hesitate to stop by our booth.

Feb 22.2016 
We shall exhibit at "FOODEX JAPAN 2016 - The 41th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2016 - The 41th International Food and Beverage Exhibition", which will be held between the 8th -11th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2016 official web site

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 8.2016 
We shall exhibit at "nano tech 2016"
We shall exhibit at "nano tech 2016 - The15th International Nanotechnology Exhibition & Conference" which will be held at Tokyo Big Sight during 27th (Wed) to 29th (Fri) of January, 2016.

Details are follows.

 [Details]
Date Jan.27(Wed.) -Jan.29(Fri.), 2016
Venue Tokyo Big Sight
Booth NO 4E25

 [Contents]
We realize High Added-Values in various growth fields such as IoT, Medical Care and Environment by Thin Film Technologies.

Saving Energy、Environmental Issue、Medical Treatment /Medical Care
[Application] Solar cell, Battery, Wearable, Sensor, Micro needle
  • Thin film deposition services:semiconductor / LCD, power device, protective film, material development etc.
  • Etching process services:Patterning /Etching process services、Dry / Wet etching
  • MEMS Total Support
    Design support from technological strategy -- design -- simulation
    Prototyping based on design such as prototyping -- pilot production --
    Capable for expansion to mass production

Functional Material, Biomimetic
[Application] Photo catalyst, Photonic crystal
  • Nanoimprint / Mold fabrication for soft lithography Trial mold for initial evaluation(Anti-reflection、Micro lens etc.)
  • Imprint services(Thermal /UV imprint、Injection molding)
  • Original anti-sticking treatment(Fine MoZt)
  • Mold cleaning services / Mold replication services

Life Sciences
[Application] DDS, Bio sensor
  • Micronit Microfluidics:Manufacturing glass-made microfluidic chips applied to micro and nano technologies. Provided with Basic experiment, Custom design, Microfluidic related equipments.

Microfabrication Equipment
  • SPS Europe:The versatile, all plastic single substrate spin processors specifically designed for applications for spin developing, spin etching, rinse / cleaning, spin drying with high resistivity for chemical and contamination.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 25.2015 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.29.2015 - Jan.3.2016

We shall resume the operation from the 4th of January, 2016.
For inquiries we will receive via our website during the period, you will retrieve reply after the 4th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2016!


Nov 24.2015 
We shall exhibit at "SEMICON Japan 2015"
We shall exhibit at "SEMICON Japan 2015" which will be held at Tokyo Big Sight during 16th(Wed) to 18th(Fri) of December, 2015.

Details are as follows.


 [Details]
Date & Time 16th (Wed.) to 18th(Fri.) of December, 2015 10:00−17:00
Venue Tokyo Big Sight
Booth No Hall 5/ 5120, Hall2 / 3608

 [Contents]
Hall 5 / 5210
We offer optimal solution for various issues such in thin film deposition, bonding & sputtering target and consumable parts for semiconductor manufacturing equipment which customers face in development to mass production stage.
"Thin film fabrication services"
  • Thin film deposition process
  • Sputtering、CVD、Vapor deposition
  • Photolithography, Etching
  • Contact aligner, Stepper, Electron beam lithography
  • Dry/Wet etching
  • Nanoimprinting total solution
  • Mold fabrication〜imprint services (From initial trial to mass production)
  • CMP/ Wafer bonding services
"Bonding process and sputtering target sales"
  • Bonding process for cylindrical target (AZO for touch panel, SC and Carbon for battery)
  • Specialized target for R&D purpose such as CZC for metal mesh application
"Consumable parts and maintenance parts for semiconductor manufacturing equipment"
  • High functional parts for CMP process (retainer ring, upgrade parts for wet cleaning equipment)
  • Repair services for Ion implantation process equipment
  • Sputtering/ Etching process Dual HDD Full compatible compact flash for FDD
Hall 3 / 3608
Development for innovative products and services for our life and environment have been progressing by the spread of IoT technology.We offer distinguishing processing technologies which is applicable for IoT related devices in "Environment・Energy" "Wearable・Medical"
"High resolution process by Nanoimprint technology"
  • Enlarge surface area in fuel sell
  • Increase efficiency of solar battery
"Thin film deposition by sputter process"
  • Inhibitory layer for metal allergy (Ti)
  • Optical catalysis layer(TiO2
"R t R thin film deposition"
  • Human sensor
  • Wearable devices
"MEMS device development and fabrication by dedicated MEMS processing technology."
  • Energy harvest by Piezo electric device
  • “Intelligent nose ring” which is nose ring form thermometer for animal husbandry
"Global network to support Intellectual Property"

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 1.2015 
Notice of Merger

It is announced that Coltibuono Trading Inc., a subsidiary company,
has been merged into Kyodo International Inc., effective as of November 1, 2015.

We appreciate all your continuous support up to the present and
we hope to have a better business partnership in the future.

Oct 27.2015 
We shall exhibit at "3rd Exhibition sponsored by Technology Research Association for Inertial Sensor
We shall exhibit at "3rd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications", which will take place during 27th of November at Japan Society for the Promotion of Machine Industry.

Here are the details.

 [Details]
Date 27th(Fri), November 2015
Venue Japan Society for the Promotion of Machine Industry

 [Contents]
'Si-Ware Systems', ASIC for inertial sensor
  • A company dedicated to ASIC for MEMS. Support your design and development by product engineers with expertise of ASIC and MEMS.
  • ASIC service, not limited to ASIC Design, verification of concept and IP, offer Prototyping to Volume Production and testing.
  • Developed very low power ASIC for high-performance sensors by original IP.
  • Contribute reduction of development cost and term by original development tool of SWS61111
  • High performance inertial sensing ASIC, SWS1110
  • Inertial sensor development platform, SWS61111

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 15.2015 
We shall exhibit at "THE 30TH PLANT ENGINEERING SHOW" of INCHEM TOKYO
We shall exhibit at "THE 30TH PLANT ENGINEERING SHOW" of INCHEM TOKYO on Wednesday 11/25 to Friday 11/27 at East Hall, Tokyo Big Sight.

Here are the details.


[Details]
Date & Time Date 11/25(Wed) - 27(Fri) 10:00 - 17:00
Venue Tokyo Big Sight

[Content]
-PERMASTORE Glass lining tanks (Methane digesters, Sludge tanks, Wastewater tanks)
-Submersible mixers and pumps
-Double and single membrane gasholders
-Gas flares
-Hexa floating covers

We are looking forward to seeing you at our stand.

Oct 6.2015 
We shall exhibit at "MNC2015 - 28th International Microprocesses and Nanotechnology Conference"
We shall exhibit at "MNC2015 - 28th International Microprocesses and Nanotechnology Conference" on Tuesday 11/10 to Thursday 11/13 at Toyama International Conference Center, Toyama, Japan.

Here are the details.

 [Details]
Date 11/10(Tue) - 13 (Thu)
Venue Toyama International Conference Center

 [Contents]
Nano/Micro Processing Service
We offer the optimum material and processes to meet your specific need in prototyping as well as providing standard device of MEMS and microfluidcs. 
  • Substrate : Various material available, such as silicon, glass and polymer
  • Deposition : Sputtering(120+kinds), evaporation, CVD, electro-plating and so on
  • Lithography/Nano-imprinting : Contact aligner, stepper, EB and nano-imprinting
  • Etching : Dry (ICP, RIE), wet and scarified etch and so on
  • CMP/Bonding : CMP, bonding and other related process
Phase-shifting mask exposure system 'PhableR 100'
The PhableR100 tool provides unprecedented ability to print high resolution periodic structures in a low-cost photolithography system.
  • High resolution below 300nm pitch
  • 4" full-field exposure
  • Non-contacted mask usable
  • Suitable for non-flat substrate
  • High uniformity below 3%
  • Overlay alignment capability
  • Available with commercial photoresist
  • Conventional mask
  • Frequency multiplication
Eulitha will provide a poster presentation regarding Phabler100.

If you intend to visit the event, do not hesitate to stop by our booth.

Sep 30.2015 
We shall exhibit at "THE 14TH JAPAN HOLSTEIN GRND PRIX"
We shall exhibit at "THE 14TH JAPAN HOLSTEIN GRND PRIX" on Friday 10/23 to Monday 10/26 at Hokkaido Holstein Exhibition Hall in Obira town, Hokkaido.

Here are the details.

 [Details]
Date 10/23(Fri) - 26 (Mon)
Venue Hokkaido Exhibition Hall

 [Contents]
SUEVIA High quality Cattle Drinking Bowls
Heated Drinking Bowls, Quick Drainage Trough
Heating Mat(Mo Mo mat)
Teat Quick Cleaner
Intelligent nose ring

We are looking forward to seeing you at our stand.

Sep 11.2015 
We will exhibit at "The 60th Annual Meeting of the Japan Society of Human Genetics"
We will exhibit at “The 60th Annual Meeting of the Japan Society of Human Genetics”, which will be held from 14th to 17th October.


 [Details]
Date 15th-17th of October.
Venue Keio Plaza Hotel Tokyo
Booth NO 7

 [Contents]
DNACollection Kit "OrageneDNA"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
NEW OMNIgene・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/ stool for gut microbiome profiling.

Please visit our booth(No.7).

Sep 11.2015 
We will exhibit at "The 74th Annual Meeting of the Japanese Cancer Association".
We will exhibit at "The 74th Annual Meeting of the Japanese Cancer Association", which will be held from 8th to 10th October in NAGOYA

Here are the details.

 [Details]
date 8th-10th of October,2015
Venue Nagoya Congress Center
ブースNO No.S6 at Shiratori Hall

 [Contents]
Oxygen Controller ProOx110
We will exhibit Oxygen controller ProOx 110 which enables hypoxia/ hyperoxia control (0.1-99.9%) in your incubator or chamber.
We will also introduce Nitrogen gas generator which works by power supply.

If you intend to visit the event, do not hesitate to stop by our booth.

Aug 18.2015 
We will exhibit at “JASIS2015”
We will exhibit at “JASIS2015”, which will be held from 2nd to 4th September.
We will also give a presentation of our product in Advanced Diagnostics Innovation Zone on 3th September.

 [Details]
Date 2nd(Wed) to 4th(Fri) September, 2015
Venue MJakuhari Messe
Booth No AB-11 (Advanced Diagnostics Innovation Zone / Hall 8)

 [Contents]
DNACollection Kit "OrageneDNA"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
NEW OMNIgene・GUT
  • An all in one system for the easy self-collection and stabilization of microbial DNA from feces/stool for gut microbiome profiling.
[Presentation]
"Plainless, non-invasive collection kit
for high quality and high quantity human DNA and intestinal flora"

Date and time: 4th September(Thu) 13:00〜13:25
Room: Advanced diagnostics innovation zone
*No need advance application 。

Please visit our booth(AB-11 in Advanced Diagnostic Innovation Zone.)

Jul 24.2015 
We shall exhibit at "11th Topical Workshop on Heterostructure Microelectronics"
We shall exhibit at "11th Topical Workshop on Heterostructure Microelectronics(TWHM2015)", which will be held at Hida Hotel Plaza (Gifu, Japan) during 24th to 26th of Aug.  

Here are the details.

 [Details]
Date 24Th(Mon) to 26th(Wed) of Augst, 2015
Venue Hida Hotel Plaza 

 [Contents]
Processing services for R&D of GaN、SiC、etc power devices
  • We offer processing services from small volume for R&D purpose of Compound Semiconductor

If you intend to visit the event, do not hesitate to stop by our booth.

Jun 24.2015 
"Jamon de Mangalica" was introduced on August edition of "LEON".
Jamon de Mangalica was introduced on August edtition of "LEON".


It's introducedon on P. 127.  Please have a look.


Jun 8.2015 
We shall exhibit at "28th Techno-Transfer in Kawasaki 2015'"
We shall exhibit at "28th Techno-Transfer in Kawasaki 2015'", which will be held between the 8 10th of July.

Here are the details.

 [Details]
Date & Time 8th(Wed) 10 11th(Fri) of July, 2015, 9:00−17:00
Venue Kanagawa Sience Park (KSP)
304 West Wing, Innovation Center Building, 3-2-1 Sakado, Takatsuku, Kawasaki City,
Kanagawa 213-0012 Japan
Booth NO 3F-33

 [Contents]
A versatile Dry ice blaster SUPERBLAST Reborn

 "Applicable to various processing and exfoliation " 
  • Paint removal
  • Burr removal
  • Burnt removal of hotplate for food
  • Sterilization for medical and nursing care. And more!
 And more!

We offer manufacturing, sales, contract services and rental of “dry ice blasters” which are machines to blast milled dry ice by high pressure air.
We support your high level manufacturing with highly functional thin film
  • Antireflection film
  • Touch panel
  • Energy harvest
  • Fuel cell / rechargeable battery
 And more!

Please feel free to contact us.

Please visit our booth at TECHNO-TRANSFER in Kawasaki 2015.

May 12.2015 
We will exhibit at "The Japanese Association for Cancer and Hypoxia Research"
We will exhibit at "The Japanese Association for Cancer and Hypoxia Research" will be held at National Institute of Genetics during 5th (Fri) to 6th (Sat) of June.

Details are follows.


 [Details]
Date 5th (Fri)-6th (Sat) of June 2015
Venue National Institute of Genetics

 [Contents]
Oxygen Controller ProOx110
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Existing incubator will work as hypoxia/hyperoxia incubator along with this unit.
  • Oxygen in simple cases can be controlled to some extent.
  • Usage with C-Camber realizes reduction of gas consumption.
  • Usable as a gas environment controller in wide range of application such as cell cultivation, small animals, and botanical experiment.
Oragene Oragene
  • • All genetic analysis starts with the collection of DNA/RNA samples. Collect reliable samples with an all-in-one system for the collection, stabilization and transportation of DNA/RNA from saliva or feces.
Also we will make presentation of our products at 16:00〜16:30 on 5th June 2015.

We are looking forward to seeing you at the conference.

May 12.2015 
We shall exhibit at "Spanish Wine & Food Tasting 2015"
We shall exhibit at “Spanish Wine & Food Tasting 2015” which will be held at several locations in Japan during May to July.
Details are as follows.

[Details]
  1. Tokyo
    Date : May 21st (Thu), 2015
    Venue : Happo-en, 1F Jour
    Time : 12:00 - 17:00
    (15:00 – 17:00 for visitors who receive no invitation from exhibitors)
     
  2. Osaka
    Date : Jun. 10th (Wed), 2015
    Venue : ANA Crowne Plaza Osaka, 3F "Manyo"
    Time : 12:30 - 17:00
     
  3. Sapporo
    Date : Jun. 23rd (Tue), 2015
    Venue : JR Tower Hotel Nikko Sapporo, 36F "Taiyo"
    Time : 12:30 - 17:00
     
  4. Nagoya
    Date : Jul. 1st (Wed), 2015
    Venue : Hilton Nagoya 4F "Take"
    Time : 12:30 - 17:00
     
  5. Fukuoka
    Date : Jul. 13th (Mon), 2015
    Venue : Solaria Nishitetsu Hotel 8F "Tsuki / Hana"
    Time : 12:30 - 17:00

[Introduction to a part of exhibit]
<Espuna>
Jamon Serrano, Paleta Curada
  We introduce Jamon Serrano and Paleta Curada in sliced pacakge. 
Easy-to-use and suitable for small party.
<Espuna>
Kicon
  We introduce Espuna's original product. Soft and mild type salcichon. Easy-to-use. It's fixed weight pacakge.
<Iberiberico>
Jamon Iberico de Bellota, etc. 
  We introduce Iberian pork products from Jabugo, which is small village in Andalucia. Jabugo is famous for tradition and ritual in the artisan production of Iberian pork Ham. Sliced-pack prodcuts are also available.
<Vegajardin>
Cheese, Membrillo, etc.
  We introduce Spanish cheese, Membrillo (Quince Jam) which is good combination with cheeses.  

If you intend to visit the event, do not hesitate to stop by our booth.

May 8.2015 
We shall exhibit at "IPPS JAPAN 2015 - International Poultry & Pig Show"
We shall exhibit at "IPPS JAPAN 2015 - International Poultry & Pig Show"in Nagoya, Japan June 10-12, 2015.

Details are follows.

 [Details]
Date & Time 10th(Wed) to 12th(Fri) of June, 9:00-17:00 (9:00 - 16:00 on 12th)
Venue Nagoya International Exhibition Hall (Portmesse Nagoya)
2-2 Kinjo-futo, Minato-ku, Nagoya 〒455-0848
Booth NO C3
 

 [Contents]
  • Highly recommended!!
    ACO Funki Quality Farrowing Pens with max. comfortability for high performance sows including anti-craching and back support, coated backdoor, quality flooring, wide trough, light board profile and many more features.
  • Highly recommended!!
    Nedap Farrwoing Feeding System with capability of automatic correct feeding depending on sow conditions, lactation stage and the number of sucking piglets. No need for feed hopper adjustment. Time and labor saving.
  • SUEVIA Drinking Bowls and Nipples (Water loss savings)
  • SUEVIA Vacuum Valve (Increased water and feed intake)
  • FunkiMat 3 (Unique dosing system and no feed blocking)
  • Intelligent Heating Controller (Energy savings by automatic temperature control)
  • FerkoFer & Playfeeder (Stress-free, oral iron supplement)
  • Clean’Sec (Higher hygiene, moisture absorption)
  • Self-cutter 2 (Tail docking with ease and safety)
  • iFEEDER (Simple constructed feeder for ad-lib feeding)
  • Electronic Sow Feeding "VELOS"(Automatic individual feeding)

If you intend to visit the event, do not hesitate to stop by our booth.

Apr 28.2015 
We will exhibit at "The 11th International Workshop on Advanced Genomics"
We will exhibit at "The 11th International Workshop on Advanced Genomics" will be held at Hitotsubashi hall in Tokyo during 20th (Wed) to 22nd (Fri) of May.

Details are follows.

 [Details]
Date 20th (Wed)-22nd (Fri) of May 2015
Venue Hitotsubashi Hall
Booth NO 17

 [Contents]
We will exhibit DNA/RNA self-collection kits.
The sample collection kits for the collection, stabilization and transportation of human or microbial DNA/RNA
  • Oragene DNA for human DNA in saliva
  • Oragene RNA for human RNA in saliva
  • HEMAGene for human DNA in buffy coat
  • OMNIgene for microbial DNA/RNA in Saliva
  • OMNIgene GUT for microbial DNA in feces T

We are looking forward to your visit our booth (NO.17).

Apr 16.2015 
We will exhibit at “BIOtech 2015”
We will exhibit at "BIOtech 2015" will be held at Tokyo Big Sight during 13th (Wed) to 15th (Fri) of May.

Details are follows.

 [Details]
Date 13th (Wed)-15th (Fri) of May 2015
Venue Tokyo Big Sight, West hall
Booth NO 2-36

 [Contents]
DNA/RNA self-collection kit DNA/RNA self-collection kit
  • All genetic analysis starts with the collection of DNA/RNA samples. Collect reliable samples with an all-in-one system for the collection, stabilization and transportation of DNA/RNA from saliva or feces.
Droplet generators Droplet generators
  • Microfluidic droplet generators are excellent tools for generating highly reproducible microsized droplets. This way droplets are generated with much higher precision and repeatability compared to conventional methods.

We are looking forward to your visit our booth(NO.2-36).

Apr 13.2015 
We shall exhibit at “The symposium of Growing Nitride Semiconductor Crystal”
We shall exhibit at “The symposium of Growing Nitride Semiconductor Crystal” which will be held on 7th May.

Details are follows.

 [Details]
Date & Time 7th (Thu.) 13:00〜8th (Fri.) 16:20 (plan)
Venue Katahira Sakura Hall (Katahira Campus at Tohoku University
2-1-1 Katahira, Aoba-ku, Sendai-city, Miyagi prefecture  P〒980-8577

 [Contents]
LED
  • PSS/ Improved efficiency of LED light emittance! TEX series
    We will display TEX series which was developed uniquely, and has implemented uniform Nanoimprint service to non-equilibrium side.
Nitride power device Contract processing service
  • We will offer several kinds of contract processing service of GaN power semiconductor, which is for R&D, to our customers from one (1) piece.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 24.2015 
We shall exhibit at "nano micro Biz"
We shall exhibit at "Nano Micro Biz", which will be held between the 22nd -24th of April.

Here are the details.

 [Details]
Date 22nd(Wed) to 24th(Fri) of April
Venue Pacifico Yokohama
Booth No D-15

 [Contents]
MEMS volume production foundry Co-exhibitor : Silex microsystems
  • φ6",8"compatible MEMS foundry  
  • Unique TSV technology : Sil-Via
    (For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology :Met-Via / Met-Cap
    (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK
    A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Nano / micro fabrication services
We offer nano/ micro fabrication service using the process of nanoimprint or semiconductor /MEMS.
Please consult us if you consider creating nano/ micro-scale sample or evaluation


[ Examples of manufacturing process ]
  • Thin film deposition (Sputtering, Evaporation, CVD, ALD, Electroplating, etc.)
  • Photolithography (Aligner, Stepper, E-Beam etc.)
  • Etching (Wet, Dry, Deep etching for high aspect ratio pattern (ICP), etc.)
  • CMP (Metal, Oxide film, Nitride film etc.)
  • Wafer bonding (Room temperature bonding, Plasma bonding, Eutectic bonding, Anodic bonding, etc.)
  • Nanoimprint (Mold fabrication, Imprint service, Anti-sticking coating etc.)
MEMS development tools
  • A lithography system for NIL mold fabrication “PhableR 100”
  • Resin-made multipurpose spin coater “POLOS”
    Made from chemical resistance resin. The system is applicable to multiple processes (coating, etching, development, cleaning, drying)
  • “AML wafer bonder”
    Alignment and bonding can be done in a single chamber.
  • “OAI Model 800” mask aligner
    Using OAI’s high quality light source, it is a compact mask aligner which is suitable for R&D Also, various UV meters and proves are available.

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 18.2015 
We shall exhibit at “MEMS Engineer Forum (MEF) 2015”
We shall exhibit at "MEMS Engineer Forum (MEF) 2015", which will be held at KFC Hall Annex during 20th (Mon) to 21st (Tue) of April.

Details are follows.

 [Details]
Date 20th (Mon), 21st (Tue) of April
Venue KFC Hall Annex

 [Contents]
MEMS volume production foundry "Silex Microsystems"
  • φ6",8" compatible MEMS foundry.
  • Unique TSV technology : Sil-Via (For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology :Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • High through-put sol-gel PZT in MEMS production line
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Total solution of ASIC for MEMS "Si-Ware Systems"
  • ASIC service, not limited to ASIC Design and IP, offer Prototyping to Volume Production and testing.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.
  • Contribute reduction of development cost and term by original development tool

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 17.2015 
We shall exhibit at "MEDTEC Japan 2015"
We shall exhibit at "MEDTEC Japan 2015'", which will be held at Tokyo Big Sight during 22nd (Wed) to 24th (Fri) of April.

Details are follows.  

 [Details]
Date & Time Apr. 22(Wed.) -Apr.24(Fri.), , 10:00-17:00 (10:00 - 16:00 on 24th)
Venue Tokyo Big Sight East Hall 4, 5, 6
Boorh NO Ohta-ward and Kawasaki-city joint exhibition booth, NO:500 zone  K-3

 [Contents]  
Nano / Micro fabrication services
We offer nano / micro fabrication service by semiconductor manufacturing equipment.
Thin film deposition and patterning (Micro channel forming, mold fabrication for plastic and so on) for more than 120 various materials (Ti, Co, Si, Au etc) are available to meet your needs of small production and R&D. 

The application example of thin film/ micro fabrication technique in medical and nursing industry
  • Barrier use (SiO2, SiN and so on)
  • Antimicrobial (Ag, Cu and so on)
  • Deodorization (TiO2 and so on)
  • Coloring of medical / nursing care equipment (Al、Au、Ti and so on)
  • Irregular pattern forming on gum / plastic products
  • Microfluidic chip
MEMS foundry
Introduction of φ8” compatible foundry, which offers volume production service of customer designed MEMS device.
We will provide the suitable foundry solutions.

MEMS device production performance for medical use
  • Micro mirror array for medical equipment use
  • Micro needles
  • Wearable devices
Cleaning system "SUPERBLAST" for precision parts / equipment
"Dry Ice Blast Cleaning System" : Spraying dry ice pallets onto the material surface at high speed, so that it can remove dirt or oil.
“No abrasion against the cleaning objects” “No liquid waste” We will introduce the revolutionary cleaning method and system

SUPERBLAST usages are as follows in medical / nursing site
  • Mold cleaning of plastic products for medical / nursing
  • Equipment cleaning and sterilization for medical / nursing
  • Removal of solid sticking matter generated during pharmaceutical production
  • Periodical maintenance / removal of filth at medical facilities
  • Degrease of instruments / appliances

If you intend to visit the event, do not hesitate to stop by our booth.

Mar 5.2015 
We shall exhibit at "The 6th Nanoimprint Technology Fair" which will be held inside FINETECH.
We shall exhibit at "Held inside FINETECH Japan '6th Nanoimprint Technology Fair'", which will be held between the 8 -10th of April. Here are the details..

Details are follows.

 [Details]
Date Apr.8(Wed.) -Apr.10(Fri.), 2015
Venue Tokyo Big Sight
Booth NO 45-13

 [Contents]  
Nanoimprint
  • Mold fabrication
    From nano mold to micro mold, we will provide you with high-quality fine mold to meet your demand.
  • Nanoimprint “Trial mold” for initial evaluation (Anti-reflection film, Photonic-crystal, Micro lens etc.)
  • Imprinting service (thermal / UV, mold injection)
  • Anti-sticking coating (FineMozt™)
  • Mold cleaning /replication service
  • Technical Consultation (By partnership with A*STAR, Singapore)
PSS Solution TEX series
  • Display “TEX series” PSS production system applying our proprietary nanoimprint techniques
  • Realization of whole surface micro/nano pattern on Sapphire/GaN substrates
  • Achieving elimination of pressurization and vacuum while realizing high throughput and reduced cost
    *TEX-01 will be exhibited at our booth
MEMS Development tool:
Phase-shifting Mask Exposure System "PhableR 100"

  • EULITHA:their proprietary photolithographic technology enables us to print high-resolution structures equivalent to that of the DUV lithography, in a non-contract, proximity photolithography with simplicity and at a reasonable cost. For nanoperiodic pattern mold fabrication.

If you intend to visit the event, do not hesitate to stop by our booth.

Jan 27.2015 
We shall exhibit at "FOODEX JAPAN 2015 - The 40th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2015 - The 40th International Food and Beverage Exhibition", which will be held between the 3rd -6th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details
To FOODEX2015 official web site

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 8.2015 
We shall exhibit at "Technical show Yokohama 2015"
We shall exhibit at "Technical show Yokohama 2015" which will be held at Pacifico Yokohama during 4th (Wed) to 6th (Fri) of February, 2015.

Details are follows.

 [Details]
Date Feb.4(Wed.) -Feb.6(Fri.), 2015
Venue PACIFICO Yokohama
Booth NO i-35 (Kawasaki Business Incubation Center (KBIC) Booth)
 

 [Contents]  
Introduction of Nanoimprint and Thin film fabrication processing service
Outsourcing of the specialized field contributes reduction of development period and initial introduction cost.This is appropriate for the people who intend to implement of increasing in sophistication of manufacturing by capturing of advancedtechnology.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 26.2014 
We shall exhibit at "nano tech 2015" .
We shall exhibit at "nano tech 2015 - The14th International Nanotechnology Exhibition & Conference" which will be held at Tokyo Big Sight during 28th(Wed) to 30th(Fri) of January, 2015.

Details are follows.

 [Details]
Date Jan.28(Wed.) -Jan.30(Fri.), 2015
Venue Tokyo Big Sight
Booth NO 4L-06

 [Contents]  
Microfabrication service
  • Sputtering thin film deposition:semiconductors・LCDs, Power devices, Passivation layer, Material research
  • Etching contract processing:Photolithography, Dry/Wet etching
  • We offer MEMS design solutions from Technology Strategy, Design to Simulation
  • We offer integration of design to Prototyping, Test Production, Pilot Production and Volume Production Foundry Services
  • We correspond to individual requirements for Design, Prototyping and Volume Production
Nanoimprint
  • Nanoimprint mold fabrication “Trial mold” for initial evaluation (Anti-reflection film, Photonic-crystal, Micro lens etc.)
  • Imprinting service (thermal / UV)
  • Anti-sticking coating (FineMozt™)
  • Mold cleaning /replication service
PSS Solution TEX series
  • Display “TEX series” PSS production system applying our proprietary nanoimprint techniques
  • Realization of whole surface micro/nano pattern on Sapphire/GaN substrates
  • Achieving elimination of pressurization and vacuum while realizing high throughput and reduced cost
MEMS Development tool
  • EULITHA:their proprietary photolithographic technology enables us to print high-resolution structures equivalent to that of the DUV lithography, in a non-contract, proximity photolithography with simplicity and at a reasonable cost.

If you intend to visit the event, do not hesitate to stop by our booth.

Dec 18.2014 
We shall exhibit at "16th IC PACKAGING TECHNOLOGY EXPO".
We shall exhibit at "16th IC PACKAGING TECHNOLOGY EXPO" which will be held inside "Nepcon Japan 2015" at Tokyo Big Sight during 14th(Wed) to 16th(Fri) of January, 2015.

Detail is as follows. 

 [Details]
Date January 14 [Wed] - 16 [Fri], 2015
Venue Tokyo Big Sight
Booth No EAST 44-18

 [Contents]  
MEMS volume production foundry "Silex Microsystems"
  • φ6",8" compatible world top MEMS foundry. High through-put sol-gel PZT in MEMS production line  
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)
     Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Total solution of ASIC for MEMS
  • ASIC service, not limited to ASIC Design and IP, offer Prototyping to Volume Production and testing.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.  
  • Contribute reduction of development cost and term by original development tool
Total solution for MEMS development
  • Complete MEMS development solution from strategy to mass production
  • Design simulation avaialble
  • Suggestion meet customer budget and schedule

If you intend to visit the event, do not hesitate to stop by our booth.

Nov 27.2014 
Announcement about the New Year holidays
Thank you very much for using our website.

Kyodo International will be closed for the New Year's holidays.
We apologise sincerely for the inconvenience.

 [New Year's holidays]
Dec.27.2014 - Jan.4.2015

We shall resume the operation from the 5th of January, 2015.
For inquiries we will receive via our website during the period, you will retrieve reply after the 5th of January.
We appreciate for your understanding.

We wish you all happy holidays and are looking forward to working with you in 2015!


Oct 30.2014 
We shall exhibit at "SEMICON Japan 2014"
We shall exhibit at "SEMICON Japan 2014" which will be held at Tokyo Big Sight during 3th(Wed) to 5th(Fri) of December, 2014.

Details are as follows.

 [Details]
Date & Time 3th(Wed) to 5th(Fri) of December, 2014 10:00-17:00
Venue Tokyo Big Sight
Booth No Hall 4 4086、Hall 3 3086

 [出展内容]
Volume Production Solutions Booth  (Consumable parts/Thin film processing/Dry ice cleaning) :
4086
<Preventive Maintenance, Retrofitting>
  • CMP : Longevity Retaining Ring, Slurry arm , Post-CMP cleaning system, QC unit for brushing
  • Ion implantation : HYT particle monitor repair/refurbish, Consumable parts etc.
  • CVD : Heater refurbish
  • Others : Compact flush to substitute FDD , Motor repair, Circuit board repair, Oerlikon Leybold Turbo pump etc.
<Sputtering Targets and Thin Film Processing>
  • Contract processing from Prototyping to Mass Production
    - Thin film on 450mm substrate will be displayed -
  • Patterning Process : Reduce initial cost and delivery time by our original mask
  • Always 120 kinds of targets are available. Custom target supply is also possible
<Cleaning Solutions>
  • Dry ice cleaning system for precious cleaning : SUPERBLAST DSC-I
  • Sales and rental of cleaning machine. On-site cleaning service.
Research & Development Solutions Booth (MEMS/Thin film processing/Nanoimprint):
3086 (Sensor/MEMS Area in IoT pavillion)
<MEMS Total Solutions>
  • MEMS Foundry : From Prototyping to Mass Production, From Analog to ASIC
  • Various MEMS development tools: Phase-shift litho system (FableR100),
    AML Wafer Bonder, Multi-purpose Spin Processor
<Nano-micro Fabrication>
  • Sputtering : For Semiconductor, FPD, Power devices, Passivation, Material development
  • Etching : Photolithography, Dry/Wet Etching
  • Various substrates : Si wafer, Glass, SiC, Sapphire etc.
<Nanoimprint Total Solutions>
  • From Mold (Standard, Custom) to Imprint services (Prototyping, Mass Production)
  • Mold Replication, Cleaning, Refurbish, Surface treatment (Fine-MoZt)
  • Technical Consultation (By partnership with A*STAR, Singapore)
 *FREE* We will conduct Exhibitor Presentation
5th December (Fri) at TechSPOT EAST(Hall 3) AM11:30 - 12:20
”Proposal of growing market entry by using MEMS foundry”

If you intend to visit the event, do not hesitate to stop by our booth.

Oct 29.2014 
We shall exhibit at "2nd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications"
We shall exhibit at "2nd Exhibition sponsored by Technology Research Association for Inertial Sensor Applications", which will take place during 28th of November at Japan Society for the Promotion of Machine Industry.

Here are the details.

 [Details]
Date 28th November 2014
Venue Lecture hall at second basement in Assembly Hall for Japan Society for the Promotion of Machine Industry, 3-5-8 Shibakouen Minato-ku Tokyo Japan 105-0011

 [Contents]
'Si-Ware Systems', ASIC for inertial sensor
  • Evolved into a standard products and custom ASIC provider.
  • Not limited to ASIC Design. Offer Prototyping to Volume Production.
  • Support your design and development by product engineers with expertise of ASIC and MEMS.

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 27.2014 
We shall exhibit at "LAB-ON-A-CHIP ASIA"
We shall exhibit at the "LAB-ON-A-CHIP ASIA", which will take place during 20th to 21st of November at Nanyang Technological University in Singapore.

Here are the details

 [Details]
Date 20th to 21st of November, 2014
Venue Nanyang Technological University, Nanyang Executive Centre, Singapore

 [Contents]  
  • Microfluidics contract manufacturing
  • Nano-micro fabrication foundry
  • Nanoimprint solutions

If you intend to visit the event, do not hesitate to stop by our booth!

Oct 24.2014 
We shall exhibit at "The 59th Annual Meeting of the Japan Society of Human Genetics"
We are pleased to inform you that we will be exhibiting at the upcoming "The 59th Annual Meeting of the Japan Society of Human Genetics" and "The 21st Japanese Society for Gene Diagnosis and Therapy" held at Tower Hall Funabori on November 20th-20nd.

It is our honor to invite you to our booth and share specific details about our DNA collection and stabilization products for genetic analysis. The sales representative of DNAGenotek, which is Canadian manufacturer of DNA self-collection kit, Oragene, will also join the conference. If you would like to set up an appointment ahead of time, please email us and I would be happy to schedule you in.

Here are the details

 [Details]
Date 20th(Thu) -22nd(Sat) of November
Venue Tower Hall Funabori 4-1-1 Funabori Edogawa-ku Tokyo Japan
Booth No 32 (The 2nd floor of exhibition hall)

 [Contents]  
We will introduce all in one system for the collection, stabilization and transportation of DNA/RNA of human and microbe from saliva.
  • DNA collection kit Oragene for human DNA
  • RNA collection kit Oragene for human RNA
  • OMNIgene・DISCOVER for microbe DNA/RNA
  • HEMAgene・BUFFY COAT for human DNA in blood sample

If you intend to visit the event, please stop by our booth (No. 32).

Sep 25.2014 
We shall exhibit at "PiezoMEMS2014"
Our MEMS foundry partner 'Silex Microsystems' shall exhibit at "PiezoMEMS2014'", which will be held at Integrated Research Center of Kobe University, innovation center, between the 28th -29th of October.

'Silex Microsystems' will also give an oral presentations of 'PZT development towards high throughput zol-gel deposition in MEMS production line' at 10:10-10:25am on 28th October.

Here are the details.

 [Details]
Date 28th(Wed), 29th(Thr) of October
Venue Integrated Research Center of Kobe University, innovation center, 2F, Foyer

 [Contents]
MEMS volume production foundry
φ8" compatible world top MEMS foundry “Silex Microsystems”
  • High through-put sol-gel PZT in MEMS production line
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)
  • Unique TSV technology : Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK
    (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
'Silex Microsystems' will give an oral presentations of 'PZT development towards high throughput zol-gel deposition in MEMS production line'
  • Date & Time: 10:10-10:25am on 28th October
  • Presenter : Silex Microsystems VP R&D Dr. THORBJÖRN "Toby" EBEFORS

If you intend to visit the event, do not hesitate to stop by our booth!

Sep 25.2014 
We shall exhibit at "NNT2014"
We shall exhibit at "NNT2014 (13th International Conference on Nanoimprint and Nanoprint Technology)", which will take place during 22th -24th of October at ANA Crown Plaza Kyoto.

Here are the details.


 [Details]
Date 22th -24th of October, 2014
Venue ANA Crown Plaza Kyoto

 [Contents] Nanoimprint Total Solution
Mold
  • Mold fabrication (Standard / Custom)
  • Mold replication / Cleaning / Refurbishment services
  • Proprietary mold anti-sticking coating technology (Fine-MoZt)

Prototype to Volume production Foundry services
  • Prototyping/Engineering to Volume production Foundry services (By collaboration with A*STAR, Singapore)
  • Contract nanoimprinting services (Thermal/UV/Injection mold, Roll to Roll method)

PSS production system TEX-01(R&D), TEX-02(Volume production)>
  • Whole surface micron/nano patterning by imprinting can be realized on sapphire / GaN substrates
  • Photonic crystal can be fabricated
  • By using dedicated soft-mold, it realizes pressure-free, vacuum-free, high throughput and cost reduction.
 

If you intend to visit the event, do not hesitate to stop by our booth!


Sep 12.2014 
We shall exhibit at “The 73rd Annual Meeting of the Japanese Cancer Association”
We shall exhibit at "The 73rd Annual Meeting of the Japanese Cancer Association" which will be held between the 25th -27th of September at Pacifico Yokohama.

Here are the details.

 [Details]
Date 25th(Thu) -27th(Sat) of September
Venue Pacifico Yokohama 1-1-1 Minato Mirai, Nishi-ku, Yokohama 220-0012, Japan
Booth NO 6

 [Contents]  
Oxygen Controller ProOx110
Oxygen Controller ProOx110x
We introduce hypoxia incubation system which has been used in iPS cell and cancer cell research.
The oxygen controller which enables hypoxia/hyperoxia control (0.1-00.9%) and Nitrogen gas generator which works with only a single electric plug.
SHIVOX : An incubator glove box for in vivo mimicking
We introduce the prototype of incubator glove box for in vivo mimicking which is under development.
It realizes a series of incubation and experiment operation in a single box which is controlled in hypoxia/hyperoxia status without exposure to the atmosphere.

If you intend to visit the event, please stop by our booth (No. 16).

Jul 28.2014 
We shall exhibit at "JASIS2014"
We shall exhibit at "JASIS2014'", which will be held between the 3rd -5th of September. We will also give a presentation of our product in Advanced Diagnostics Innovation Zone on 5th September.

Here are the details.  


 [Details]
Date 3rd(Wed) to 5th(Fri) of September, 2014
Venue Makuhari Messe, Hall5
Booth No. AD-23 (Advanced Diagnostics Innovation Zone)
Floor Map

 [Contents]  
DNA Collection Kit "Oragene"
  • A collection kit for saliva with a stabilizing reagent for storage of DNA at ambient temperatures.
  • The DNA collected is high quality and quantity allowing for use in most downstream applications.
<NEW>HEMAgene・BUFFY COAT
  • Stabilizing reagent of DNA found in buffy coat cells in blood.
  • Once mixed in with the buffy coat cells, it stabilizes DNA for easy transport and storage at ambient temperatures
<Upcoming product>OMNIgene・GUT
  • An all in one system for the non-invasive self-collection and stabilization of microbial DNA from feces for gut microbiome profiling.
[Presentation] "Plainless, non-invasive collection kit for high quality and high quantity DNA"
Date and time: 5th September(Fri) 14:30〜14:55
Room:Advanced diagnostics innovation zone (AD-P)
*No need advance application

Please visit our booth (AD-23 in Advanced Diagnostic Innovation Zone).

Jun 9.2014 
We shall exhibit at "27th Techno-Transfer in Kawasaki 2014'"
We shall exhibit at "27th Techno-Transfer in Kawasaki 2014'", which will be held between the 9 -11th of July.

Here are the details.


 [Details]
Date 9th(Wed) to 11th(Fri) of July, 2014
Venue Kanagawa Science Park (KSP)
Booth NO  14

 [Contents]  
  SUPER BLAST
Surface cleaning through micro-fine dry ice particlespowered by high-pressure air
Dry ice blast equipment: sales – contract cleaning – equipment rental
 
Applications ideas:
  • Semiconductor manufacturing equipment parts cleaning
  • Removal of resin attached to the mold in injection molding
  • Machined parts degreasing
  • Outer wall cleaning
  • Food processing cutting tools cleaning
  • Cleaning of inside of chemical coating equipment
  • Hot plates used in the food industry
  • Impurity removal
  • Leaked engine oil
  • Surface finish
  • Cooling
  • Mirror polish and degreasing
  • Cleaning carriage of trains
  • Heat exchanger
  • Substrate deburring
  • Medical and nursing equipment cleaning and sterilization
 
 
Features of dry ice blasting
  • Hits target then directly sublimates ===> no liquid waste
  • Very soft, gentle cleaning ===> no damage to cleaned surface
  • Reuse of factory generated CO2 ===> no environmental impact
  

If you intend to visit the event, please stop by our booth!


May 22.2014 
We shall exhibit at "Spanish Wine & Food Tasting 2014"
We shall exhibit at “Spanish Wine & Food Tasting 2014” which will be held at several locations in Japan during May to July.
Details are as follows.

[Details]
  1. Tokyo
    Date : May 26th (Mon), 2014
    Venue : Keio Plaza Hotel Tokyo, The Main Bldg. 4F, Hana(B,C,D)
    Time : 12:00 - 17:00
    (15:00 – 17:00 for visitors who receive no invitation from exhibitors)
     
  2. Osaka
    Date : Jun. 10th (Tue), 2014
    Venue : ANA Crowne Plaza Osaka, 3F "Manyo"
    Time : 12:30 - 17:00
     
  3. Sapporo
    Date : Jun. 23rd (Mon), 2014
    Venue : JR Tower Hotel Nikko Sapporo, 36F "Taiyo"
    Time : 12:30 - 17:00
     
  4. Nagoya
    Date : Jul. 3rd (Thu), 2014
    Venue : Hilton Nagoya 4F "Take"
    Time : 12:30 - 17:00
     
  5. Fukuoka
    Date : Jul. 14th (Mon), 2014
    Venue : Solaria Nishitetsu Hotel 8F "Tsuki / Hana"
    Time : 12:30 - 17:00

[Introduction to a part of exhibit]
<Ramaders>
Sobrasada de Mallorca
  Mallorcan tradicional spreadable salami which is made from Mallorcan pork.
Finally available in Japan!!
<Wine>
 
  We introduce white wine and Sherry wine which are good combination with cured ham and sausage.
<Espuna>
Canitas
  Spanish Chorizo became a thin and short stick type. It's ideal as snack.
<Espuna>
Jamon Serrano sliced pack
  Not only a fixed weight but also a fixed number of pieces for one package.  

If you intend to visit the event, do not hesitate to stop by our booth.

May 19.2014 
We shall exhibit at "Biomass EXPO" which will be held inside Smart Community Japan.
We shall exhibit at held inside Smart Community Japan 'Biomass EXPO'", which will be held between the 18 -20th of June.

Here are the details.

 [Details]
Date & Time 18th(Wed) to 20th(Fri) of June, 10:00-17:00
Venue Tokyo Big Sight,  East hall 2 & 3
Booth NO  BE-30

 [Contents]  
Glass Lining Tank
The best containment solution with high quality, high performance and low cost for various application such as digester tanks and slurry tanks.
Submersible mixers and pumps
High agitation and pumping capability. Easy installation to various tanks.
Gas holders
Low cost gas storage solution. Single/ Double membrane types, Top mount type and Tank suspension type.
Gas flare
Safe and secure combustion. High quality for long time operation and durability.
Biogas analysis unit
All necessary components within a single housing. Precise measuring and sampling.
Hexa-Cover® Floating Cove
Blocks made of high quality plastic. Just put in blocks to tank creating a floating cover to reduce odor and evaporation and algae growth at low cost.
Seepex snake pumps
Compact and cost effective construction. Easy maintenance. Can transport the wide range of materials from low to high viscosity.

If you intend to visit the event, do not hesitate to stop by our booth!


May 2.2014 
We shall exhibit at "IVD Japan 2014" with DNA Genotek Inc.
DNA Genotek and Kyodo International shall exhibit at “IVD Japan 2014” which will be held at Tokyo Big Sight during 14th (Wed) to 16th (Frit) of May, 2014.

Details are as follows.

 [Details]
Date May 14th (Wed) to 16th (Fri)
Venue Tokyo Big Sight / WEST hall 4
Booth NO  11-56(DNA Genotek Inc.)

 [Contents]  The person in charge from DNA Genotek, the manufacturer of Oragene will be accompanied with us.
 DNA Collection Kit Oragene DNA Collection Kit "Oragene"
  • Preservation, extraction and purification of DNA can be done from saliva in room temperature.
HEMAgene・BUFFY COAT << NEW >>
We will introduce “HEMAgene BUFFY COAT” which realizes storage of DNA from blood in room temperature.
  • After adding the product to collected or frozen blood, the liquid is ready to store in room temperature.

If you intend to visit the event, do not hesitate to stop by DNA Genotek booth.


Mar 17.2014 
We shall exhibit at "Nano Micro Biz"
We shall exhibit at "Nano Micro Biz", which will be held between the 23rd -25th of Aprily.

Here are the details.


 [Details]
Date 23rd(Wed) to 25th(Fri) of April
Venue Pacifico Yojohama
Booth NO V-14

 [Contents]
MEMS volume production foundry
φ8" compatible world top MEMS foundry “Silex Microsystems”
  • Unique TSV technology : Sil-Via(For better thermal resistivity and higher density by applying all Si structure)  
  • Unique TSV technology : Met-Via / Met-Cap (For better yield by applying Cu hollow structure)
  • Unique implementation methodology : SmartBLOCK (A methodology to reduce time and cost by applying proprietary process library and short loop confirmation)
Nano / micro fabrication services
We offer nano/micro fabrication service by semiconductor manufacturing environment from small to large volume.
  • Thin Film Deposition (Sputtering/Evaporation/CVD/ALD/Electroplating/PZT film by PLD method etc.)
  • Photolithography (Aligner/Stepper/E-Beam etc.)
  • Etching (Wet/Dry/Deep etching for high aspect ratio pattern)
  • CMP
  • Wafer bonding
  • Nanoimprint
MEMS development tools
  • “PhableR 100” phase shift lithography system
  • “POLOS” multi-purpose spinner (Resin made)  
  • ”PiezoFlare 1200” PLD (Pulse Laser Deposition) system
  • Desktop hot plate
  • “AML wafer bonder”
  • ”OAI Model 800” Double side mask aligner for MEMS production

If you intend to visit the event, do not hesitate to stop by our booth!

Mar 17.2014 
We shall exhibit at "The 5th Nanoimprint Technology Fair" which will be held inside FINETECH.
We shall exhibit at Held in We shall exhibit at "Held inside FINETECH Japan '4th Nanoimprint Technology Fair'", which will be held between the 10 -12th of April.

Here are the details.


 [Details]
Date 9th(Wed) to 11th(Fri) of April, 2014
Venue Tokyo Big Sight
Booth NO 8-12

 [Contents] Nanoimprint Total Solution
Mold
  • Mold fabrication (Standard / Custom)
  • Mold replication / Cleaning / Refurbishment services
  • Proprietary mold anti-sticking coating technology (Fine-MoZt)

Prototype to Volume production Foundry services
  • Prototyping/Engineering to Volume production Foundry services (By collaboration with A*STAR, Singapore)
  • Contract nanoimprinting services (Thermal/UV/Injection mold, Roll to Roll method)

PSS production system TEX-01(R&D), TEX-02(Volume production)>
*TEX-01 will be exhibited at our booth
  • Whole surface micron/nano patterning by imprinting can be realized on sapphire / GaN substrates
  • Photonic crystal can be fabricated
  • By using dedicated soft-mold, it realizes pressure-free, vacuum-free, high throughput and cost reduction.
 

If you intend to visit the event, do not hesitate to stop by our booth!


Feb 28.2014 
We shall exhibit at "MEDTEC Japan" .
MEDTECへのリンクWe shall exhibit at “MEDTEC Japan", which will be held between the 9th -11th of April at Tokyo Big Sight.


Here are ditails;


 [Details]
Date 9th -11th of April, 2014
Venue Tokyo Big Sight
Booth NO 2613(in the Kawasaki city pavilion)

 [Contents]
ProOx Dry ice(CO2) cleaning system SUPERBLAST
  • Our proprietary cleaning system “Dry ice blast cleaner” is an ecological dry cleaning system which is suitable for burr removal, mold cleaning, fat removal. It is adequate for cleaning of medical equipment and parts as it does not generate residue and waste liquid.
Thin film coating services of various material Thin film coating services of various material
  • We offer thin film coating such as titanium, gold, ceramic at semiconductor-level clean room (Sputtering, CVD, Evaporation etc.)
 Bio-Printer for tissue engineering 3D Discovery Bio-Printer for tissue engineering 3D Discovery
  • Spatial control of cells and morphogens in a three-dimensional scaffold is an innovative approach to construct designed organotypic in-vitro models of soft and hard tissue.

If you intend to visit the event, do not hesitate to stop by our booth (#2613).


Feb 21.2014 
We shall exhibit at "The 13th Congress of the Japanese Society for Regenerative Medicine"
We shall exhibit at “The 13th Congress of the Japanese Society for Regenerative Medicine ", which will be held between the 4th -6th of March at Kyoto International Conference center.

Here are the details.

 [Details]
Date 4th -6th of March, 2014
Venue Kyodo International Conference center
Takaragaike, Sakyo-ku, Kyoto 606-0001 Japan
Booth NO 43

 [Contents]
酸素コントローラー ProOx Oxygen Controller ProOx110x
  • Realizes hypoxia/hyperoxia control (0.1〜99.9%) by single unit.
  • Create an environment with various oxygen level for cell cultivation, animal/botanical experiment.
  • C-chamber for cell culture will reduce the consumption of gases.
  • Animal chamber can be used for hypoxia or high oxygen experiment for mouse and rats.
Glove box incubator system Glove box incubator system
  • Create an environment with various oxygen and CO2 level for cell cultivation in glove box.
  • It is possible to conduct various experiment and culture in glove box for a long time without change in Oxygen level.
 Bio-Printer for tissue engineering 3D Discovery Bio-Printer for tissue engineering 3D Discovery
  • Spatial control of cells and morphogens in a three-dimensional scaffold is an innovative approach to construct designed organotypic in-vitro models of soft and hard tissue.

If you intend to visit the event, do not hesitate to stop by our booth (#43).

 


Feb 3.2014 
We shall exhibit at "FOODEX JAPAN 2014 - The 39th International Food and Beverage Exhibition!"
We shall exhibit at "FOODEX JAPAN 2014 - The 39th International Food and Beverage Exhibition", which will be held between the 4th -7th of March.
Here are the details.

This time, we will introduce abundant traditional food stuffs in addition to our boasting cured ham.
We assure your new discovery at there. Please drop by our booth.

Exhibition details

If you intend to visit the event, do not hesitate to stop by our booth!

Jan 31.2014 
We shall exhibit at "Supermarket Trade Show 2014"
We shall exhibit at “Supermarket Trade Show 2014” which will be held in February.

Details are as follows.

[Details]
Date : Feb. 12th - 14th, 2014
Venue : Tokyo Big Sight East Hall
Time : 10:00 - 17:00
(10:00 - 16:00 on 14th)

[Introduction to a part of exhibit]
< Sliced package >
Sliced pack of imported ham and salami, suitable for consumers
We introduce sliced pack of imported ham and salami from Italy, Spain, Germany, Hungary and USA. It's sliced in our slicing factory in Japan.
<Product without artificial coloring and preservative> We introduce cured ham and salami which are without artificial coloring and preservative such as sodium nitrite.
<Mangalica Pacetta>
 
We introduce Pancetta produced using Mangalica belly by our special recipe in our Japanese cured ham factory.

Contact Us
TEL)+81-044-853-2611 (Main)
FAX)+81-044-854-1979
KYODO INTERNATIONAL INC.
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
Back to Top

Biotechnology

[Devices and Reagents for Bioresearch]

  • Nucleic Acid
  • Cell Cultivation / Imaging
  • Protein, Organic

[Biotechnology applied products]

KYODO INTERNATIONAL INC.
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
TEL)+81-044-853-2611 (Main)
FAX)+81-044-854-1979
Contact Us
Copyright © KYODO INTERNATIONAL,INC.
all rights reserved.
Company logos and product names on this website
are registered or unregistered trademark.
Contact us for request of usage of illustrations,
photos and copies on this website.