Master Fabricatioin Service

▼ Si Master ▼

Si
Items : Master / Mold
Materials : Polymer NIL OK!
This is the best material, as it is easy to process and allows all kinds of measures. You can decide the width from mm.

▼ Resist Master ▼

Resist
Items : Master
Materials : Polymer
It has exceptional stability, when it comes to photolithography processing. Lens and other forms can be made 3D. The resist will be made a master and Ni electroforming will be brought, which will have NIL application possible.

Mold Fablication Service »

▼ Si Mold ▼

Si
Items : Master / Mold
Materials : Polymer NIL OK!
This is the best material, as it is easy to process and allows all kinds of measures. You can decide the width from mm.

▼ Ni Electroforming Mold ▼

Ni
Items : Mold / Im printing
Materials : Polymer NIL OK!
Si and resist are developed from master. It's epistatic to hardness of Si and glass, as it's easy to recreate from original mold to copy mold.

▼ Quartz Mold ▼

Quartz
When we make this, we use interfered glass. For mold, the other often used material is quartz.

▼ Metal Mold ▼

Metal
Items : Mold / Imprinting
Materials : Polymer / Glass NIL OK!
Possible size of structure is the same as Si and glass, if Ti and W are used as the material. Its most specific feature is that it can be imprinted on glass. KII has developed its own mold.

▼ Diamond Mold ▼

Diamond (under development)
Items : Mold / Imprinting
Materials : Glass
Diamond is the best material for low-expansion, thermal resistance, thermal conductivity, hardness, tolerance to ablation, demolding, etc. Especially, it is suitable for nano-imprinting to glass.

Traial Mold for Nanoimprinting »

Nano-Imprinting Service »

▼ Fine Pattern Imprinting on Various Film Imprinting ▼

Polymer
For trial imprinting , most suitable is resist, PMMA, polyca, polyamide, polyester, COC, COP, etc. For other supplied resins, we can offer original imprinting.

▼Resist Patterning (Si, Glass, Sapphire, etc. on substrates.)▼

Resist
Items : Master
Materials : Polymer
It has exceptional stability, when it comes to photolithography processing. Lens and other forms can be made 3D. The resist will be made a master and Ni electroforming will be brought, which will have NIL application possible.

▼ Glass Fabrication ▼

Glass
Items : Master / Mold
Materials : Polymer NIL OK!
This is a material, suitable for UV imprinted mold.The width can be decided as freely as the Si one. About the depth, it is a little bit worse than Si, but its transparency can be used for making microfluidic chips.

PSS volume production system TEX-01 »

NIL solution »

• Mold Replication Service
• Mold Cleaning Servicr
• Engineering Service