- KYODO INTERNATIONAL INC./Japan
- Biotechnology
- Biospherix Oxigen Controller
Biospherix Oxigen Controller
New proposal for hyperoxic/hypoxic experiment
The device to produce environment with hyperoxia or hypoxia
for cell culture and experiment by small animals.
- Control range of oxygen tension 0.1 to 99.9%
- Reduce gas consumption
- Control oxygen tension inside various chambers
- Cell culture
- ⇒ I want to make inside of incubator be in hyperoxia/hypoxia condition
- ⇒ I want to make part of incubator in hyperoxia/hypoxia
- ⇒ I want to change oxygen tension constantly
- ⇒ I want to execute long-term experiment of cell culture in stable oxygen tension environment without exposure to air
- Experiment by small animals
- ⇒ I want to execute culture experiment of small animals
- ⇒ I want to change oxygen tension constantly
<Cell culture> I want to make inside of incubator be in hyperoxia/hypoxia condition
By only adding oxygen controller ProOx110, you can control oxygen tension inside existing CO2 incubator
It is economical solution as you can use incubator you already have without preparing extra space.
In case of use of high capacity incubator, please use oxygen controller ProOx360 which is designed for large volume.
- Required devices/equipment
- ProOx110
- CO2incubator, Gas cylinder, gas regulator for low pressure etc. are also necessary.
<Cell culture> I want to make part of incubator in hyperoxia/hypoxia and control oxygen tension in more precise manner
By using chamber, it is possible to minimize volume to be controlled. It leads to reduction of gas usage and more precise tension control. Especially recommended in case less than 1% oxygen control is required.
It is possible to execute multiple protocols by installing multiple C-Chamber inside incubator.
In case it is necessary to control CO2 inside C-Chamber, please use ProCO2, concurrently.
CO2 control range is 0.1 to 20.0%.
- Required devices/equipment
- ProOx110 / ProCO2 / C-Chamber
- CO2 incubator, Gas cylinder, gas regulator for low pressure etc. are also necessary.
About chamber
By using chamber, it is possible to reduce gas consumption and provide more precise gas tension control.
- Small volume, Reduce gas consumption
- Robust, Less maintenance
- Doors with Magnetic sealing
- With tray for humidification
- C-174 35.6×30.9×14.7cm
- C-274 35.6×30.9×16.6cm
- C-374 35.6×30.9×21.7cm
- C-474 35.6×30.9×26.8cm
It is still possible to use your own chamber depends on airtightness of the chamber.
<Cell culture> I want to change oxygen tension constantly
In case of constant ascent/descent of oxygen tension, OxyCycler is recommended.
It is possible to control 2 sets of C-Chamber via attached PC.
Gas tension can be automatically ascent/descent depend on lapsed time.
- Required devices/equipment
- OxyCycler C42 / C-Chamber
- CO2 incubator, Gas cylinder, gas regulator for low pressure etc. are also necessary.
<Cell culture> I want to execute long-term experiment of cell culture in stable oxygen tension environment without exposure to air.
During operation for medium exchange and drug dosing, the environment is exposed in the air due to tentative pulling out cultured cell from incubator.
In case long-term stable culture environment is necessary, usage of C-Shuttle and Xvivo are recommended.
Operation
Create gas environment as same as C-Chamber by attached control unit to C-Shuttle. It enables operation within C-Shuttle without exposure to the air.
Transportation
It is possible to remove sensor and gas tube from chamber easily. It enables transportation in maintained gas tension without exposure to the air.Incubation
Set C-Chamber inside incubator and control gas in C-Chamber by ProOx and ProCO2
- Required devices/equipment
- OxyCycler C42 / ProOx110 / ProCO2 / C-Chamber
- CO2 incubator, Gas cylinder, gas regulator for low pressure etc. are also necessary.
Xvivo Workstation
A glove box incubator system which enables operation and incubation without changing gas environment.
A series of incubation experiment can be executed without exposure to the air.
<Experiment by small animals> I want to execute culture experiment of small animals in hyperoxia/hypoxia environment
By using chamber, gas consumption is reduced and more precise gas tension control is possible.
- Required devices/equipment
- ProOx110 / Animal Chamber
- Gas cylinder, gas regulator for low pressure etc. are also necessary.
- Maintain adequate humidity for small animals
- With fan for gas agitation
- Easy to clean
- Made by Polypropylene (Doors are made by Acrylic)
- A-15274-P 38.1×50.8×50.8cm
- A-30274-P 76.2×50.8× 50.8cm
- A-66274-P 167.6×50.8×50.8cm
It is possible to substitute wardrobe for animal chamber.
<Experiment by small animals> I want to change oxygen tension constantly
In case ascent/descent oxygen tension in accordance with lapsed time, usage of OxyCycler is recommended.
It is possible to control 4 sets of C-Chamber via attached PC.
Gas tension can be automatically ascent/descent depend on lapsed time.
- Required devices/equipment
- OxyCycler A84 / Animal Chamber
- Gas cylinder, gas regulator for low pressure etc. are also necessary.
Biospherix Ltd. (USA)
Biotechnology
Nucleic Acid
- DNASelf-Collection Kit : Oragene®-DNA
- Test reagent OMNIgene™ - DISCOVER
- RNASelf-Collection Kit : Oragene®-RNA
- DNA/RNA Purification Workstation : LabTurbo
Cell Cultivation / Imaging
- Oxygen Controller : Biospherix
- Glove Box Incubator : Biospherix Xvivo system ™
- Live Cell Imaging Chamber & Incubator : Chamlide™
- Near infrared femtosecond laser microtome : TissueSurgeon
- Near infrared femtosecond laser nanodissection : CellSurgeon
- Multi Purpose Fermentor : Liflus GX
Protein, Organic
Microfluidic Chips (Lab-on-a-chip)
Biotechnology applied products
TEL)+81-044-853-2958 (Did)
FAX)+81-044-854-1979
KYODO INTERNATIONAL INC.
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
FAX)+81-044-854-1979
2-10-9 Miyazaki,
Miyamae-ku, Kawasaki-shi,
Kanagawa-ken, 216-0033,
Japan
